HPO

Reports Burner Technology

Low scale reheating of semi-finished metal products in furnaces with a central recuperator Cover

Low scale reheating of semi-finished metal products in furnaces with a central recuperator


Christian Schwotzer / Matthias Schnitzler / Herbert Pfeifer / Helen Ackermann / David Diarra

more
Safety-related burner management and control systems Cover

Safety-related burner management and control systems


Karl-Heinz Kruse

more
Regenerative blast furnace gas blastoflame ultra low NOx burner Cover

Regenerative blast furnace gas blastoflame ultra low NOx burner


Kemal Omerbegovic / David G. Schalles / Frank L. Beichner

more
Burner system using entrained hot pyrolysis gas from biomass Cover

Burner system using entrained hot pyrolysis gas from biomass

NULL
Ahmad Al-Halbouni / Anne Giese / Jörg Leicher / Klaus Görner / Dieter Schillingmann / Hartmut Schillingmann / Christian Hüwelmann

more
O2- and CO-reduction at combustion plants Cover

O2- and CO-reduction at combustion plants

NULL
Gerd Witte / Torsten Schütt / Ulrich Schmitz

more
Burner with lower NOx emissions Cover

Burner with lower NOx emissions


Stefan Baur / Vasile Jechiu / Herbert Bauer / Zvonko Hristov / Vittorio Levaggi

more
Aluminium melting furnace with primary heat recovery Cover

Aluminium melting furnace with primary heat recovery


Armand Voicu / Dragos Caragea / Florin Parlog / Marian Cilianu / Florin Sterie / Ion Buga

more
Furnace modernization of a continuous annealing line Cover

Furnace modernization of a continuous annealing line


Marc Blumenau / Uwe Bonnet

more
Sensory combustion optimisation of gas combustion systems Cover

Sensory combustion optimisation of gas combustion systems


Frank Hammer

more
Efficiency-enhancing maintenance of heating systems Cover

Efficiency-enhancing maintenance of heating systems


Dirk Mäder / Octavio Schmiel Gamarra / Mario Schulze / René Lohr

more
Research centre for combined optimum burner and furnace chamber design Cover

Research centre for combined optimum burner and furnace chamber design


Enrico Mozzi

more
Energy saving by amodular control system for regenerative burners Cover

Energy saving by amodular control system for regenerative burners


Donald F. Whipple / Günther Reusch / Stefan Baur

more
Application of regenerative burners in forging furnaces Cover

Application of regenerative burners in forging furnaces


Ales Molinek / Günther Reusch / Josef Srajer / Josef Domagala

more
Burner control and burner management systems in industrial automation systems Cover

Burner control and burner management systems in industrial automation systems


Ulrich Hofmann / Peter Sänger

more
Practical burner applications in consideration of DIN EN 746-2 Cover

Practical burner applications in consideration of DIN EN 746-2


Dirk Mäder / René Lohr / Octavio Schmiel Gamarra

more
Development of a multi-fuel burner for operation with light oil, natural gas and low calorific value gas Cover

Development of a multi-fuel burner for operation with light oil, natural gas and low calorific value gas


Anne Giese / Eren Tali / Hüseyin Yilmaz / Jörg Leicher

more
Changing natural gas qualities: impact on industrial gas-fired applications Cover

Changing natural gas qualities: impact on industrial gas-fired applications


Jörg Leicher/Anne Giese

more
Gap flow burners in industrial applications Cover

Gap flow burners in industrial applications


Joachim G. Wünning

more
Use of regenerative burner systems in batch-wise furnace operation Cover

Use of regenerative burner systems in batch-wise furnace operation


Erwin Tschapowetz/Helmut Krammer, Jörg Geidies

more
Low NOx oxy-fuel combustion in non-ferrous metallurgy Cover

Low NOx oxy-fuel combustion in non-ferrous metallurgy


Steven MacLean/Jörg Leicher, Anne Giese, Josef Irlenbusch

more
New low NOx solution for high-speed burners Cover

New low NOx solution for high-speed burners


Sabine von Gersum/Martin Wicker

more
The role of flameless oxidation in the ”Energiewende” Cover

The role of flameless oxidation in the ”Energiewende”


Joachim G. Wünning

more
New heating hood generation for energy saving and NOx reduction Cover

New heating hood generation for energy saving and NOx reduction


Peter Wendt/Frank Maschler, Georg Velten, Jörg Wortmann, Andreas Heßler, Jörg Zumbrink

more
Experimental analysis of a multi fuel burner for low calorific gases in large scale firing applications Cover

Experimental analysis of a multi fuel burner for low calorific gases in large scale firing applications


Steven MacLean/Anne Giese, Dieter Kutzner, Helge Traxler

more
Improving the productivity of controlled atmosphere furnaces with oxygen Cover

Improving the productivity of controlled atmosphere furnaces with oxygen


Anders Lugnet/Pierre Forêt

more
Modernization of heating furnaces for rolling mills Cover

Modernization of heating furnaces for rolling mills


Armand Voicu/Anca Mohonea, George Velichi, Florin Parlog Ioan Iagar

more
Process-optimised lambda flexibility utilised in practice Cover

Process-optimised lambda flexibility utilised in practice


Frank Kleuser

more
Development of natural gas qualities in Europe Cover

Development of natural gas qualities in Europe


Klaus Altfeld/Peter Schley

more
Relations between global recirculation ratio and area ratio in combustors fired with jets Cover

Relations between global recirculation ratio and area ratio in combustors fired with jets


Daniel Cardoso Vaz

more
Efficient burner operation in different industrial sectors by versatile burner control Cover

Efficient burner operation in different industrial sectors by versatile burner control


Ulrich Hofmann/Peter Sänger

more
Efficient combustion systems for aluminium industry Cover

Efficient combustion systems for aluminium industry


Günther Reusch/Josef Domagala

more
Heat treatment furnaces with extended ranges of temperature Cover

Heat treatment furnaces with extended ranges of temperature


Armand Voicu/George Velichi, Florin Parlog

more
Recuperator burner for use in "single-ended" radiant tubes Cover

Recuperator burner for use in "single-ended" radiant tubes


Herbert Bauer

more
High efficiency burner systems for aluminium melting furnaces Cover

High efficiency burner systems for aluminium melting furnaces


Donald F. Whipple/Jörg Teufert, Josef Domagala

more
GlasFLOX® burner - 3 years in operation Cover

GlasFLOX® burner - 3 years in operation


Anne Giese/Reiner Mackh, Karl Zirkelbach, Benjamin Köster, Gottfried Schwarz

more
Control, regulation and visual display of a regenerative burner system for an aluminium melting furnace Cover

Control, regulation and visual display of a regenerative burner system for an aluminium melting furnace


Michael Schaake/Andree Kuhlmann

more
Saving fuel gas in industry by means of optimum burner settings Cover

Saving fuel gas in industry by means of optimum burner settings


Christian Schare

more
New burner technology for reduction of NOx-emissions from gas fired industrial furnaces Cover

New burner technology for reduction of NOx-emissions from gas fired industrial furnaces


Thomas Lewin

more
Infrared drying with porous burners in industrial environments Cover

Infrared drying with porous burners in industrial environments


Michael Angerstein

more
Numerical and experimental investigations on oxy-fuel combustion in glass melting furnaces Cover

Numerical and experimental investigations on oxy-fuel combustion in glass melting furnaces


Jörg Leicher/Anne Giese

more
Reliable and fast CFD-modelling of flameless oxidation Cover

Reliable and fast CFD-modelling of flameless oxidation


Joachim G. Wünning

more
Saving energy by modernizing the heating system, using modern self recuperative burners Cover

Saving energy by modernizing the heating system, using modern self recuperative burners


Heinz-Peter Gitzinger/Martin Wicker, Phil Ballinger

more
New ceramic heat exchangers with enhanced heat transfer properties for recuperative gas burners Cover

New ceramic heat exchangers with enhanced heat transfer properties for recuperative gas burners


Dimostehnis Trimis/Volker Uhlig, Robert Eder et al.

more
Regenerative burners for reduction of energy consumption and emissions Cover

Regenerative burners for reduction of energy consumption and emissions


Jörg Teufert/Stefan Baur

more
Furnace burner delivers low NOx with high combustion air temperatures Cover

Furnace burner delivers low NOx with high combustion air temperatures


Val Smirnov/Eclipse, Ad de Pijper, Eclipse, Inc. Rockford

more
Energy-efficient furnace heating - Regenerative heat recovery with flat flame burners Cover

Energy-efficient furnace heating - Regenerative heat recovery with flat flame burners


Sabine von Gersum/Wolfgang Adler, Wolfgang Bender

more
Modern reheating practices focus on combustion technology Cover

Modern reheating practices focus on combustion technology


Sacha Scimone

more
Saving fuel gas in industry by means of optimum burner settings Cover

Saving fuel gas in industry by means of optimum burner settings


Christian Schare

more
Regenerative burner systems for batch furnaces in the steel industry Cover

Regenerative burner systems for batch furnaces in the steel industry


Jörg Teufert/Josef Domagala

more
New recuperative and regenerative burners for minimizing exhaust gas losses and emissions Cover

New recuperative and regenerative burners for minimizing exhaust gas losses and emissions


Joachim G. Wünning

more
High-Temperature Insulation Wool (HTIW) and modern burner systems in heat treatment processes Cover

High-Temperature Insulation Wool (HTIW) and modern burner systems in heat treatment processes


Erwin Tschapowetz/Heinz Wimmer

more
Energy efficiency in thermo processing plants Cover

Energy efficiency in thermo processing plants


Franz Beneke/Egbert Baake

more
Pusher reheat furnace combines increased production with a reduction in emissions Cover

Pusher reheat furnace combines increased production with a reduction in emissions


James Feese/Felix Lisin, Gerrit Wohlschläger, Sandra Runde

more
Results from 120 oxyfuel installations in reheating and annealing Cover

Results from 120 oxyfuel installations in reheating and annealing


Joachim von Schéele

more
New recuperative and regenerative burners for minimizing exhaust gas losses and emissions Cover

New recuperative and regenerative burners for minimizing exhaust gas losses and emissions


Joachim G. Wünning

more
Development of high velocity burners and their use in process-optimized tempering furnaces Cover

Development of high velocity burners and their use in process-optimized tempering furnaces


Roland Rakette/Dagmar Lange, Ingo Riehl

more
Hydrogen measurement at carburizing processes Cover

Hydrogen measurement at carburizing processes


Stefan Heineck/Frank Theisen

more
Ultra low NOx side burners for preheating furnaces in the steel mills Cover

Ultra low NOx side burners for preheating furnaces in the steel mills


Stefan Baur/Werner Högner/Gustav Heine/Josef Domagala

more
Industrial burners with compact burner management system on industrial applications Cover

Industrial burners with compact burner management system on industrial applications


Heye Bloeß/Peter Sänger

more
Combustion of purge gases from industrial furnaces Cover

Combustion of purge gases from industrial furnaces


Roland Berger

more
Direct heating of air using surface burners Cover

Direct heating of air using surface burners


Ad Heijmans

more
Flame Monitor with SIL 3 approval Cover

Flame Monitor with SIL 3 approval


Cornelius Wülker/Thomas Albrecht

more
Regenerative burners for double-P radiant tubes in vertical galvanizing lines Cover

Regenerative burners for double-P radiant tubes in vertical galvanizing lines


Alexander Georgiew/Joachim G. Wünning/Uwe Bonnet

more
Regenerative burner systems for batch furnaces in the steel industry Cover

Regenerative burner systems for batch furnaces in the steel industry


Jörg Teufert/Josef Domagala

more