HBIS Laoting was founded in 2017 in order to transfer production capacities out of the core city of Tangshan, and belongs to HBIS Group Co., Ltd. HBIS Group is one of China's largest iron and steel material manufacturers and comprehensive service suppliers.
The two twin-strand continuous slab casters are each designed for a production capacity of 2.1 million metric t/a. They have a machine radius of 9.5 m and a metallurgical length of 35.1 m. They cast slabs with a thickness of 230 mm in widths ranging from 900–1,900 mm. The maximum casting speed is 1.8 m/min. The range of products covers ultra-low carbon and low carbon steels, deep drawn, structural peritectic alloyed steels, and pipe grades.
Primetals is responsible for the detail engineering of the casting platform and the strand-guiding system, the basic and detail engineering of the maintenance area, as well as the engineering of the automation and the software for the new continuous slab casters. The scope of supply includes the complete electrical installations and automation, as well as core components, such as molds and mold oscillators, and Smart Benders and Smart Segments for the strand-guide system. Primetals will also supervise the installation and commissioning, and conduct the customer training on site. A LiquiRob system will manipulate the hydraulic cylinder of the ladle slide gate and the media connection in the ladle area. Another LiquiRob system on the ladle caster platform will manipulate the ladle shrouds, measure the temperatures, and control the firing of the ladles.
Both casting plants will be equipped with a straight cassette-type Smart Mold with LevCon mold level control, Mold Expert for the automatic breakout detection system and process data monitoring, DynaWidth for changing the width of the slab during operation, a DynaFlex mold oscillator and an electromagnetic mold stirrer. I-Star rollers will be used to support the strand in the segments of the strand-guide system. The DynaPhase and Dynacs 3D process models will be used for the dynamic control of the strand temperature. They calculate and dynamically control a three-dimensional temperature profile along the whole length of the strand. This enables the working points of the strand cooling, and thus the final strand solidification, to be determined precisely as a function of the casting speed, slab format and steel grade. DynaGap Soft Reduction 3D will be used to improve the interior quality of the slabs. The roller gap is dynamically adjusted during the final solidification in line with the working points calculated by Dynacs 3D. The center and edges are cooled in the bending section and segments to allow uniform, optimal cooling over the entire width of the slabs.
(Source: Primetals Technologies, Limited)