Generic filters
Exact matches only
FS Logoi
The first coil processed in the annealing line supplied by SMS to Kobelco Angang in Anshan, China

Kobelco Angang produces with new annealing line

Kategorien: |
Autor: Redaktion

Datum: 31. Mai. 2016

After completion of the commissioning phase, the plant will produce around 600,000 t of steel strips, mostly for the automotive industry. Strain hardening resulting from rolling is removed from the material by annealing, rapid cooling and subsequent skin-pass rolling, while setting the superior mechanical properties exactly as required. The new line will produce, among others, ultra-high-strength grades for light-weight, high-safety automotive structural components.
The heart of the processing line is the high-performance, eco-friendly Drever radiant-tube annealing furnace which comes with two alternative cooling systems. The ultra-fast cooling system based on gas cooling is used for grades such as high-strength TRIP, dual-phase, complex-phase and other high-strength steels as well as drawing and deep-drawing grades. The water-spray cooling system, which achieves even higher cooling rates, can be used to also produce ultra-high-strength martensitic grades and multi-phase steels. Both systems provide very uniform cooling guaranteeing that the strip geometry and surface quality satisfy most exacting requirements.
With a rolling force of up to 18 MN, the six-high inline skin-pass mill is designed to skin-pass strips with high tensile strengths of up to 1,600 MPa. Such strength values require skin-passing under very high strip tension. Therefore the inline skin-pass mill is able to apply strip tensions of up to 350 kN. Work rolls of two different diameter ranges have been provided in order to optimally cover all material strengths and skin-passing rates for the entire product spectrum. Technological features such as work roll and intermediate roll bending, strip-edge-oriented roll shifting and a strip-blowing device arranged in the exit section of the stand assure high quality of the strips.
The line has been designed for a strip thickness range between 0.5 and 2.5 mm and widths from 750-1,650 mm. The maximum process speed is 180 m per minute, while at the entry and exit, speeds of up to 280 m per minute may be achieved.
(Source: SMS group)